Contact and directions
Laboratory for Optical 3D Metrology and Computer Vision

  1. Kempten University of Applied Sciences
  2. Faculty of Mechanical Engineering
  3. Labs
  4. Laboratories
  5. 3Dvisionlab
  6. Contact and directions

On this page you can find the address of the laboratory and how to get there.

Laboratory address

Labor für optische 3D Messtechnik und Computer Vision
Hochschule Kempten
Bahnhofstr. 61
87435 Kempten

GPS-Coordinates: 47.714849 (lat.), 10.312662 (long.)

 

Directions

By car

If you will be travelling here by car, we recommend the following directions. Leave the A7 motorway at junction 134 and take the B12 towards Kempten. After approx. 2 km, when you reach Berliner Platz, turn onto the Schumacher ring road towards Durach/Centre, keeping slightly to the left. After another 3.5 km, turn left into Bahnhofstrasse and choose the righthand lane. Just a short way along the road, you should turn right into the public car park for Kempten University of Applied Sciences.

 

Once you have parked, pass by the barrier towards the new building cladded in wood, and enter Machine Hall H on the right via the white automatic door. Our laboratory is in Room H210, opposite the stairs leading to the ground floor.

By train

If you wish to use public transport, please travel to Kempten main station and then follow these directions on foot.

 

Leave the station through the main entrance/exit, walk past the bus stops and cross the car park to use the underpass below the ring roads. After that, take the path to the right towards Building A at Kempten University of Applied Sciences. Walk through the university’s public car park towards the main campus.
When you reach the barrier, head towards the new building cladded in wood, and enter Machine Hall H on the right via the white automatic door. Our laboratory is in Room H210, opposite the stairs leading to the ground floor.